>>Finger ID
  • SPECIFICATIONS
    Platen Dimensions 1.3” Vertical x .9” Horizontal
    Image Dimensions 1.0” Vertical x .8” Horizontal (500x400 Pixels)
    Geometric Distortion 1.5% or less
    Illumination Uniformity 3db or less at the edges and corners; Non-uniformity piecewise monotonic throughout
    Resolution 500dpi +/- 2%
    Grayscale Quantization 8 bits per pixel
  • SPECIFICATIONS
    Dimensions (LxWxH) 133x66x18mm(5.2x2.6x0.7inches)
    Weight <150 grams (5.3 oz)
    Optical sensorn FBI PIV IQS certified, 500 dpi, 256 gray levels, 14x22 mm sensing area
    Display 2.4” QVGA color LCD
    Battery Li-ion, 1230 mAh
    Drop test 1.4m (4 ft)
    Ingress Protection IP32
    Operating conditions • Temperature: -10° to 50°C (14° to 122° F)
    • Humidity: 95% non-condensing
    Storage conditions -20° to 70°C (-4° to 158° F)
  • SPECIFICATIONS
    USB Certification Spec USB-IF USB.ORG
    Power Source USB Host
    Ingress Protection IP65 Bezel To Film
    Humidity 30~85%%RH < 40C / 104F (Non-condensing)
    Scanner Assembly 2.36" x 2.44" x 1.30" / 60mm x 62mm x 33mm
    FCC/CE Conformance FCC Part 15 (per ANSI C62.4:2003) Class A, CSA ICES-003 Class A, CE Emissions: EN 55022:2006 Class A, CE Immunity EN 55024:1998/A1:2001/A2:2003, IEC 61000-4-2
    Certification Mobile ID IQS FAP 45, PIV, GSA FIPS 201, FBI Appendix F Certied
    Power Consumption • DC Current: <40mA idle, <250mA VBUS = +5.0VDC full scanning
    API Interface Capture Two Finger Direct and Single Finger Roll Image, Multi-device / Multi-thread support
    OS Support Windows 7, Windows 8.X, Windows XP, Windows Server, Windows Mobile 6.5, Linux, Android 4.0 (or higher)
    Surface Resistance Ammonia, IPA, Methanol, Soaps/detergents, Salt Water
    Vibration Test per MIL-STD-810F (Method 514.5), Category 24, Fig. 514.5C-17